Product Explanation
This is a replacement filter accessory for the SkinApple 380 Shower Head — it is not a health supplement, cosmetic or medical device.
The filter functions as a physical sediment filter: it removes particulate matter down to 5 µm, including particles that may enter water through aging pipes. The filter material is NSF-certified polypropylene with silver nano ceramic antibacterial balls.
Independent tests cited by SkinApple include: a Korea Microplastics Research Centre test showing 100% microplastics removal, and a Korea Environment and Water Works Institute test showing 100% residual chlorine removal at both 50 L and 100 L throughput at 2 kgf/cm² pressure and 6.30 L/min flow rate. These are laboratory test conditions; real-world results depend on local water quality and usage frequency.
Average filter lifespan is approximately 2–3 months depending on water quality and usage. The filter can be visually inspected to determine when replacement is needed.
Research Takeaway
Laboratory tests cited by SkinApple show 100% microplastics removal and 100% residual chlorine removal under controlled test conditions. Real-world filtration performance depends on local water quality, usage frequency and filter condition. This is a physical filtration product, not a health treatment device.
Product Facts
These details are drawn from the official Atomy Malaysia product listing. Confirm current price and PV on the official page before purchasing.
Product identity
- Product name: SkinApple 380 Shower Sediment Filter
- Product type: Replacement filter accessory
- Compatibility: SkinApple 380 Shower Head
- Origin: 100% Made in Korea
- Official page: https://my.atomy.com/product/M91077
Price and PV
- Last recorded price: RM 65.00 | PV: 5,600
- Prices and PV can change — confirm the current figures on the official page.
Technical specifications
- Filtration level: down to 5 µm particle size
- Filter material: PP (Polypropylene) + Silver Nano Ceramic antibacterial ball
- NSF/ANSI 42 certified (Certificate C0005618-01)
- BPA-free
- Estimated filter lifespan: 2–3 months (water quality dependent)
Laboratory test results (cited by manufacturer)
- Korea Microplastics Research Centre: 100% microplastics removal confirmed in test conditions
- Korea Environment and Water Works Institute: 100% residual chlorine removal at 50 L and 100 L throughput under test conditions (2 kgf/cm², 6.30 L/min flow rate)
Key Official Points
- Replacement sediment filter for SkinApple 380 Shower Head.
- Filters particles as small as 5 µm.
- Filter material: Polypropylene (NSF-certified), with Silver Nano Ceramic antibacterial ball.
- Laboratory tests showed 100% microplastics removal and 100% residual chlorine removal under test conditions.
- Approximate filter lifespan: 2–3 months (varies with water quality and usage).
- BPA-free materials.
- 100% manufactured in Korea.
- Replace when water pressure drops or filter visually shows discolouration.
- Current price and PV must be confirmed on the official Atomy Malaysia page.
Ingredient Notes
Filter material
The filter uses polypropylene (PP) as the primary filtration medium, certified to NSF/ANSI 42 standard by NSF International (Certificate C0005618-01). Silver Nano Ceramic antibacterial balls are incorporated into the filter assembly.
Before You Buy
Do you have a SkinApple 380 Shower Head?
This is a replacement filter accessory and requires the compatible SkinApple 380 Shower Head. Confirm compatibility before purchasing.
How long has your current filter been in use?
The recommended replacement interval is approximately 2–3 months, depending on water quality. Replace sooner if you notice reduced water pressure or filter discolouration.
Buyer Guidance
- Confirm compatibility with the SkinApple 380 Shower Head before purchasing.
- Follow the 4-step replacement process shown on the product page: detach the shower head handle, remove the used filter, insert the new filter, reattach the handle.
- Replace the filter when water pressure drops noticeably or when the filter shows visible discolouration from rust or impurities.
- Confirm the current price and PV on the official Atomy Malaysia page before purchasing.
Official Product Source
Official product link, source date and product visuals are kept together here for checking.
| Product number | M91077 |
|---|---|
| Product name | SkinApple 380 Shower Sediment Filter (Compatible to Atomy Shower Head) |
| Category | All Products |
| Last checked | 2026-08-01 |
| Official page | https://my.atomy.com/product/M91077 |
Official product visuals
Official product visuals and filter replacement diagrams are available on the Atomy Malaysia product page.
FAQ
Product-specific questions for this page.
Will this filter work with any shower head?
This filter is specified as compatible with the SkinApple 380 Shower Head available via Atomy Malaysia. Confirm compatibility with your specific shower head model before purchasing.
How often should the filter be replaced?
On average, approximately every 2–3 months depending on local water quality and usage frequency. Replace sooner if you notice reduced water pressure or visible discolouration in the filter.
What certifications does the filter material carry?
The filter is made from NSF/ANSI 42-certified polypropylene (Certificate C0005618-01, issued by NSF International). The SkinApple shower head system also carries the World Atopy Association Eco Mark and Korea HACCP certifications — these are certifications for the overall shower product, not personal health claims.
Need help checking this product?
Send the product name and we will help you check ingredients, usage notes, cautions and current product details.
Contact CK